[Spud387]

Originally Posted by c0nquistad0rian

I know that on their own, the wheel wells in the tuuk chassis aren't wide enough to accommodate 59mm wheels. Read the whole thread that I linked about putting spacers in. You can file down that area between the wheel wells on the tuuk chassis to make the 59mm fit. It's been done. Check out the pictures.

I understand that you want to go back to 59mm wheels, but you can do it for a much cheaper price than you can ordering the Labeda Predator chassis. THAT WAS THE WHOLE POINT OF THE TUUK MOD TO BEGIN WITH. And it looks like you're concerned about the expense of the Predator chassis, anyways. Consider that a 1/4" plastic cutting board, metal file, and drill can all be had for less than the price of the Predator chassis (again, I'm not saying that the Predator's a bad chassis, but you've got a perfectly good tuuk chassis). Don't bite the bullet when you have the antidote right in front of you!

Ok, I didn't see the part where he filed down the chassis. I will read through the rest of the thread later today when i get a chance.